<img height="1" width="1" alt="" style="display:none" src="https://www.facebook.com/tr?id=803910706352322&amp;ev=PixelInitialized">
800.639.6315
request a quote
cpt-university-1

CPT University

What is DCP testing, and how does it compare to CPT?

- Posted by VertekCPT

Vertek DCP and Data Acquisition UnitDynamic Cone Penetration (DCP) testing is used to measure the strength of in-situ soil and the thickness and location of subsurface soil layers.

It is similar to CPT in that a metal cone is advanced into the ground to continuously characterize soil behavior. However, unlike in CPT, where the cone is driven into the ground at a constant rate by varying amounts of force, in DCP, the cone is driven by a standard amount of force from a hammer, and how far the cone moves with each blow is used to determine the soil density and properties at that level.

In DCP testing, the pushing force is applied by manually dropping a single or dual mass weight (called the hammer) from a fixed height onto the push cone unit. The resulting downward movement is then measured. Unlike CPT systems, basic DCP equipment is hand-portable and may be limited to test depths of 3-4 feet: this makes it a good choice for shallow testing applications such as road bed construction and maintenance. Since DCP is essentially hand-powered, it is cheaper and more portable than CPT equipment, but the possibility of human error makes it trickier to obtain consistent and accurate data.

Vertek DCP Data Acquisition Smartphone App

Historically, one of the largest difficulties associated with DCP has been obtaining accurate depth difference measurements with a hand rule after each blow of the hammer. As you can imagine, taking these measurements by sight and recording them by hand can be slow, finicky work. Plus, to measure the total depth, the sum of these measurements is calculated, so it is easy to accumulate a troublesome amount of error if each measurement is even slightly off.

Fortunately, handheld electronics technology has alleviated these issues to a great extent. Vertek’s Handheld DCP System uses a smartphone app and a laser rangefinder to automatically count blows and measure, record and plot depth. From the smartphone, this data can be easily graphed in the field and transferred to a computer or client for reporting and analysis. Automatic data collection saves time, increases accuracy, and means that the test can be efficiently completed by one person.

Vertek ADCP Unit

To further increase the repeatability and efficiency of DCP testing, fully automated (ADCP) systems are available. ADCP rigs can be mounted on lightweight trailers, commercially available trucks, or ATVs. Automated tests are both faster and more consistent than their manual counterparts, and also decrease physical labor for the operator.

DCP and ADCP testing and data analysis is a broad subject, so we’ll return to it in another blog. In the meantime, be sure to check out the DCP testing information and video demonstrations on our site! You can also download our catalog to see the full specifications and capabilities of Vertek’s DCP and ADCP equipment. 

 

Topics: Cone Penetration, Introductory, DCP